Floor milling for underfloor heating in Warsaw.
In Warsaw we mostly mill new apartments straight from the developer, before the owners lay their floors. We work in the screed that is already there, so you don’t wait weeks for a new one.
“Great team, total professionalism, proper equipment, zero dust. I recommend them to everyone.”
01 · Warsaw and the surrounding area
Developer-finish apartments and houses around Warsaw.
Bought an apartment with a finished screed and radiators, but want underfloor heating? No need to rip up the floor. We mill the channels, lay the pipes and connect them to the manifold. In houses around Warsaw we often do this when switching from a boiler to a heat pump.
- Travel time
- approx. 5 h
- Typical screed
- cement and anhydrite, 5–6 cm
- We also cover
- Piaseczno, Pruszków, Legionowo
02 · How it works
Screed and floor milling: we cut channels for the pipes instead of breaking up the floor.
We mill the screed with a machine connected to an industrial vacuum. The milling machine cuts channels as deep as the pipe, and the dust goes straight into the bag. We work the same way in concrete and anhydrite floors. That's why reviews mostly mention one thing: zero dust.
Planning the loops
We plan the loops from the manifold to every room, so the heat spreads evenly.
Milling the screed
We mill the floor with a vacuum-fed machine: a pipe-sized channel, with no dust in the house.
Laying the pipe
We press the pipe into the channel in one piece, so there are no joints under the floor.
Filling with compound
We fill the channels with filling compound. Once it has dried, you can lay panels or tiles.
Manifold and leak test
We connect the loops to the manifold and run a leak test. The installation is our responsibility.
03 · Recent projects
See how it looks in other homes.
04 · Your screed
Milled underfloor heating: will it work in my home?
Suitable
- Cement and anhydrite screed
- from 4 cm
- Replacing radiators with underfloor heating
- renovation
- For a heat pump
- low temp.
- Apartment in a block of flats
- no height gain
Not suitable
- Screed thinner than 4 cm or without insulation underneath
- Wooden floor on joists
Not sure what screed you have? Text a photo to 507 125 794 and we'll assess it for free.
05 · Price
Underfloor heating milling: price per m²
Floor area
The larger the area, the lower the rate per square metre.
Screed type
The harder and thicker the screed, the longer the milling takes.
Travel
We work all over Poland.
Tell us the floor area and we'll call back with a price.
06 · Reviews
Customer reviews
One of the highest-rated companies in the industry in Poland.
Reviews translated from Polish.“They do it extremely professionally. Zero dust. They milled our attic and despite the open staircase on the ground floor we could carry on as normal: cooking, doing laundry, having guests over.”
“Great team, total professionalism, proper equipment, zero dust. I recommend them to everyone.”
“Quick, efficient and professional service, and great contact before the job. I recommend them wholeheartedly.”
“A very professional and reliable company! They leave a good impression, a tidy site and good work behind them.”
“Done on time and efficiently, great contact and a great price!”
“Most importantly: fast, efficient, with no dust at all. A 10/10 job.”
“Fast job. Real expertise. No dust. 100% recommended.”
“They are punctual and keep their word. They have huge experience in what they do and give good advice too.”
“They did a perfect job: punctual, reliable and happy to give advice.”
“Expert and friendly contact, a quick date, flawless work. Highly recommended!”
“Great team, you can see the experience and professionalism. Fast, efficient and clean.”
“The milling was done to plan, on the agreed date, with no problems at all.”
“Very good contact, the service was done professionally and on time.”
“An efficient and professional team. I am very happy with the job.”
“I am happy with the result of their work. Everything as promised.”
07 · FAQ
Questions in Warsaw.
Your question isn't here? Call us and we'll answer straight away.
08 · Quote
How much will it cost you?
Give us the floor area and your phone number. We'll call back with a price, with no obligation.
What happens next
- We call you back and ask about your screed.
- We give you a price. For an unusual floor, we take a look first.
- We agree on a date and arrive with all the equipment.